E2
This error code indicates that there is a problem with the heater meaning that the machine is unable to heat water properly. This is most likely a wiring issue, which you may be able to resolve with the help of the instruction manual.
However, I would recommend enlisting the help of an expert.
Possible causes
- Faulty heating element:
- The heating element, which is responsible for heating the water, may be burned out or malfunctioning.
- Wiring issues:
- Damaged or loose wiring connections associated with the heating element could be the culprit.
- Control board problems:
- In some cases, a faulty control board might be unable to send signals to the heating element correctly.
- Thermostat malfunction:
- The thermostat, which regulates the water temperature, might be faulty, preventing the heating element from activating.
Troubleshooting the E2 Error Code
- Check for obvious signs of damage: Inspect the heating element and surrounding wiring for visible signs of burns, corrosion, or loose connections.
- Test the heating element: Use a multimeter to test the heating element's resistance. If it's significantly different from the expected value, it likely needs replacement.
- Inspect the wiring: Carefully examine the wiring harness for damage or loose connections. Repair or replace any faulty wiring.
- Consider the control board: If the heating element and wiring appear intact, the control board might be the issue. This typically requires professional diagnosis and repair.
- Check the thermostat: If you suspect a faulty thermostat, you'll need to test its continuity using a multimeter. A faulty thermostat often needs replacement.
Additional Tips
- Consult your user manual: Refer to your Beko washing machine's user manual for specific troubleshooting instructions for the E2 error code related to your model.
- Seek professional help: If you're not comfortable with electrical repairs or the issue persists, it's best to contact a qualified washing machine technician for a thorough assessment and repair.