The "Ob" error code on a Kenmore washer signifies an off-balance load during the spin cycle. This means the clothes inside the washer drum are not evenly distributed, causing the washer to vibrate excessively and potentially malfunction.

Here's a breakdown of the Ob error and troubleshooting steps

Off-Balance Load Error (Ob)

• A balanced load is essential for the washer to spin efficiently and safely. An unbalanced load can put strain on the washer's components and lead to noise, vibration, and even walking during the spin cycle. The Ob error code is triggered by the washer's sensors detecting an imbalance.

The meaning of the SL error code on a Kenmore washer can vary depending on the specific model. Here are the two most common interpretations

The meaning of the LS error code on a Kenmore washer depends on whether you have a top-load or front-load washer

The "Sr" error code on a Kenmore washer indicates a problem with a stuck relay. A relay is an electronic switch that controls the flow of electricity to different components in the washer. If a relay gets stuck in the "on" or "off" position, it can disrupt the normal operation of the washer.

The error codes CA and CI on a Kenmore washer both indicate a problem related to unbalanced loads during the spin cycle. Here's a breakdown of the meaning and troubleshooting steps for both codes

Unbalanced Load Error (CA or CI)

• During the spin cycle, the washer needs a balanced load to distribute weight evenly and spin efficiently. An unbalanced load can cause excessive vibration, noise, and potentially damage the washer. The CA and CI codes are triggered when the washer detects an imbalance.

The F/dU error code on a Kenmore washer signifies a door lock error, similar to the F/dL code you inquired about previously. Both codes indicate an issue with the washer's door lock mechanism or the communication between the lock and the control board.

Here's a breakdown of the meaning and troubleshooting steps for the F/dU error

Door Lock Error (F/dU)

• A secure door lock is essential for safety during the wash cycle. The washer will not operate with the door unlocked to prevent potential water leaks or injury.

Possible Causes of F/dU Error

• Faulty door latch - The physical latch mechanism on the washer door might be damaged or malfunctioning, preventing it from securing properly.
• Door lock switch issue - The switch that communicates the door's locked state to the control board might be defective or not registering the lock correctly.
• Wiring problems - Loose or damaged wiring connections between the door lock and the control board could disrupt communication and lead to the error.
• Less likely (Control board issue) - In rare cases, the control board itself might be malfunctioning and unable to receive signals from the door lock switch.

The F/dL error code on a Kenmore washer signifies a door lock error. This means the washer's door isn't properly locked or the control board isn't receiving the correct signal indicating a secure lock. Here's a breakdown of the issue and troubleshooting steps

Door Lock Error (F/dL)

• A secure door lock is essential for safety during the wash cycle. The washer will not operate with the door unlocked to prevent potential water leaks or injury.

Possible Causes of F/dL Error

• Faulty door latch - The physical latch mechanism on the washer door might be damaged or malfunctioning, preventing it from securing properly.
• Door lock switch issue - The switch that communicates the door's locked state to the control board might be defective or not registering the lock correctly.
• Wiring problems - Loose or damaged wiring connections between the door lock and the control board could disrupt communication and lead to the error.
• Less likely (Control board issue) - In rare cases, the control board itself might be malfunctioning and unable to receive signals from the door lock switch.

The exact meaning of F/15 on a Kenmore washer can depend on the specific model. Here are two possible interpretations:

The F/14 error code on a Kenmore washer indicates a problem with the communication between the control board and the Central Control Unit (CCU) on-board program chip. Here's a breakdown of what this means and troubleshooting steps:

Meaning of F/14 Error

• The control board, which acts as the "brain" of the washer, is unable to receive or interpret data from the CCU program chip. This essential communication is needed for the washer to operate through the wash cycle properly.

Possible Causes of F/14 Error

• Temporary glitch - A temporary glitch in the control board or CCU communication might cause the F/14 error.
• Loose wiring connection - Electrical connections between the control board and the CCU might be loose or damaged, disrupting communication.
• Faulty control board - The control board itself might be malfunctioning and unable to communicate with the CCU.
• Faulty CCU program chip - In rare cases, the CCU program chip itself might be defective.

The meaning of F/13 on a Kenmore washer can vary depending on the specific model. Here are the two most common interpretations: