d10
The d10 error code on Maytag washing machines signifies a door lock sense error, meaning the washer's control board isn't receiving a signal that the door is properly locked. This prevents the washer from starting or continuing the cycle for safety reasons. However, the specific meaning and troubleshooting steps can vary depending on your Maytag model and type of washer
For Top-Load Maytag Washers:
- d10 typically indicates a problem with the door lock mechanism or switch. This means the switch isn't sending a signal to the control board, even if the door is physically closed.
- Older models might interpret d10 as a motor circuit failure. This means the control board isn't able to communicate with the motor, preventing it from spinning.
For Front-Load Maytag Washers:
- d10 usually denotes a problem with the lid lock mechanism or switch. Similar to top-load models, the switch isn't sending a "locked" signal to the control board.
- In some cases, d10 could indicate a drain problem. This means the control board isn't detecting a proper drain cycle, preventing the washer from proceeding to the next stage.
Troubleshooting the d10 error code in Maytag Washer
- Identify your Maytag model:
- Knowing the exact model number and year of manufacture is crucial for pinpointing the specific meaning of the d10 code for your washer.
- Consult the user manual:
- Your Maytag user manual will have specific troubleshooting steps for the d10 code based on your model. Refer to it for detailed instructions tailored to your washer.
- Basic troubleshooting:
- Check the door: Ensure the door is completely closed and latched (especially for front-load models).
- Power cycle the washer: Turn off the washer at the power outlet or circuit breaker, wait for a minute, and then turn it back on.
- Look for obstructions: Check for any debris or clothing stuck around the door opening or in the drain filter.
- For top-load washers:
- Manually test the door lock: Some models have a way to manually test the door lock. Follow your user manual's instructions.
- For front-load washers:
- Check the lid lock mechanism: Look for any visible damage or debris around the lid lock mechanism.
- Manually press the lid lock switch: Some models have an accessible lid lock switch you can press manually to see if it triggers the lock signal.
Additional things to remember:
- Do not attempt to force the door or lid closed or bypass the d10 error, as it could damage the washer or void your warranty.
- If your washer is still under warranty, Maytag might cover repairs related to the d10 error code.
- Provide detailed information to Maytag support when contacting them, including your model number, year of manufacture, any other error codes displayed, and specific symptoms you're experiencing.
I hope this information helps