The d19 error code on Maytag washing machines indicates a problem with the upper dryer temperature being too high in stacked washer-dryer units. This means the temperature inside the dryer compartment has reached a level exceeding safe operating limits. However, the specific meaning and troubleshooting steps can vary depending on your model and type of washer-dryer unit.
Possible Meanings of d19 Error Code:
For Stacked Maytag Washer-Dryer Units:
- d19 typically signifies the upper dryer thermistor is malfunctioning or detecting an excessively high temperature, causing the control board to shut down the drying cycle. This could be due to:
- Faulty thermistor: The sensor itself might be malfunctioning, sending inaccurate temperature readings to the control board.
- Wiring issues: Loose or damaged wires connecting the thermistor to the control board could disrupt the signal.
- Blocked vent: A clogged dryer vent can restrict airflow and trap heat, causing the temperature to rise excessively.
- Heater malfunction: In rare cases, a faulty heater element could be causing the high temperature.
For Other Maytag Washing Machines (less likely):
- In some older Maytag washing machine models, d19 might indicate a different issue, such as:
- Motor control circuit error: This is less likely but could potentially occur in specific models.
Important Note: Determining the exact meaning of d19 for your specific Maytag washer-dryer unit requires knowing its model number and year of manufacture.
Troubleshooting the d19 error code in Maytag Washer
- Identify your Maytag model: Knowing the exact model number and year of manufacture is crucial for accurate interpretation of the error code and appropriate troubleshooting.
- Consult your user manual: The Maytag user manual for your specific model will likely have detailed troubleshooting instructions for the d19 code. Refer to it for guidance tailored to your washer-dryer unit.
- Basic troubleshooting:
- Power cycle the washer-dryer: Turn it off at the power outlet or circuit breaker, wait for a minute, and then turn it back on.
- Check for obstructions: Ensure there are no clothes or debris stuck in the upper dryer vent or around the thermistor (if you can locate it visually).
- Clean the dryer vent: This is crucial to ensure proper airflow and prevent overheating. Consult your user manual for specific cleaning instructions.
Advanced Troubleshooting (Proceed with Caution):
Attempt these ONLY if comfortable and knowledgeable about appliance repair. Improper actions can damage the washer-dryer or void your warranty.
- Visually inspect the thermistor (if accessible): Some models might allow you to access the thermistor. Consult your user manual for instructions and only proceed if you're comfortable.
- Check wiring connections (not recommended): Inspecting wiring connections within the appliance requires technical expertise. If unsure, seek professional help from a qualified appliance technician.
Additional things to remember:
- Do not attempt major repairs involving internal components like the thermistor or control board if you're unsure. Contact Maytag customer support or a qualified technician for professional assistance.
- If your washer-dryer is still under warranty, Maytag might cover repairs related to the d19 error code.
- When contacting Maytag support, provide details like your model number, year of manufacture, any other error codes displayed, and specific symptoms.