For Top-Load Maytag Washers:

• d3 typically indicates a problem with the lower dryer temperature being too high. 
  • This means the lower dryer thermistor detects temperatures exceeding the safe operating range, triggering the error to prevent potential damage.
• Some older models might interpret d3 as a water temperature sensor error. 
  • This means the control board isn't receiving the correct temperature signal from the water temperature sensor, impacting wash and rinse cycles.

For Front-Load Maytag Washers:

• d3 often denotes a problem with the lid switch circuit on the control board. 
  • This means the control board isn't receiving a signal that the lid is closed, preventing the washer from starting the cycle.
• In some instances, d3 might indicate a pressure sensor fault. 
  • This means the control board isn't receiving accurate water pressure readings, hindering proper water level detection and triggering the error.

Troubleshooting Steps:

1. Identify your Maytag model: 
   • Knowing the exact model number and year of manufacture is crucial for pinpointing the specific meaning of the d3 code for your washer.
2. Consult the user manual: 
   • Your Maytag user manual will have specific troubleshooting steps for the d3 code based on your model. Refer to it for detailed instructions.
3. Basic troubleshooting:
   • Check the door: Ensure the door is completely closed and latched (for front-load models).
   • Power cycle the washer: Turn off the washer at the power outlet or circuit breaker, wait for a minute, and then turn it back on.
   • Check for obstructions: Look for any debris or clothing stuck around the door opening or in the drain filter.
4. For top-load dryers:
   • Ensure proper ventilation: Check if the dryer vent hose is clogged or restricted, potentially causing overheating.
5. Contact Maytag Support: 
   • If the above steps don't resolve the issue, contact Maytag customer support for further assistance. They can provide a more accurate diagnosis and recommend repair options based on your specific model and error code.

Additional things to remember:

• Do not attempt to bypass the d3 error or force the washer to operate further, as it could worsen the problem or cause damage.
• If your washer is still under warranty, Maytag might cover repairs related to the d3 error code.
• Provide detailed information to Maytag support when contacting them, including your model number, year of manufacture, any other error codes displayed, and specific symptoms you're experiencing.

I hope this comprehensive information helps you troubleshoot the d3 error code on your Maytag washing machine!