drn
The "drn" error code on a Maytag washing machine indicates a drainage problem, similar to the F9 E1 error code mentioned earlier. It essentially means the washer is unable to properly drain the water from the drum, preventing the cycle from continuing.
What error drn means:
- The washer detects an issue with draining water during the wash or rinse cycle.
- This could be due to several reasons, including:
- Clogged drain hose: Debris like lint, coins, or hair can block the hose, preventing water flow.
- Clogged drain filter: The filter trap inside the washer could be clogged with debris, restricting water drainage.
- Improper drain hose installation: Faulty installation, such as the hose being kinked or positioned too high, can hinder drainage.
- Faulty drain pump: In rare cases, the pump responsible for removing water might be malfunctioning.
Troubleshooting the drn error code in Maytag Washing Machine
- Check the drain hose:
- Disconnect the hose from the back of the washer and the wall drain.
- Look for any blockages or kinks, and straighten or clean the hose if necessary.
- Clean the drain filter:
- Locate the drain filter according to your washer model's manual (usually behind a small panel at the bottom front).
- Remove and clean the filter thoroughly with warm water and mild detergent.
- Verify drain hose installation:
- Ensure the hose isn't kinked or pinched anywhere.
- Check that the end of the hose isn't positioned too high (usually no more than 36 inches from the floor).
- Reset the washer:
- Turn off the washer at the power outlet or circuit breaker.
- Wait for one minute.
- Turn the power back on and restart the washer.
- Consult the user manual:
- Your Maytag model's user manual might have specific troubleshooting instructions for the "drn" code. Refer to it for detailed guidance.
Additional things to remember:
- Do not bypass the drain filter or force the drainage process, as this can worsen the problem.
- If the above steps don't resolve the issue, contact Maytag customer support for further assistance. They can diagnose the problem and recommend repair options if needed.
- Remember, attempting to repair internal components like the drain pump yourself can be risky and void your warranty.
Comparison with F9 E1 error code:
While both the "drn" and F9 E1 codes indicate drainage issues, they might have slightly different nuances depending on your specific Maytag model.
- The "drn" code might be a more generic term for drainage problems, while F9 E1 might be used for specific issues related to the drain sensor or system.
I hope this information helps you troubleshoot the "drn" error code on your Maytag washing machine!