E35
The E35 error code on your Kenmore washer indicates an issue with overflowing during the wash cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E35 code aligns with Whirlpool's system. Here's what the E35 error signifies
- Overfilling Detected (E35) - The E35 code suggests the washer has detected water overflowing beyond a safe level. This could be due to several reasons
- Faulty Water Level Sensor - A malfunctioning water level sensor might be sending incorrect signals to the control board, causing the washer to overfill.
- Clogged Drain System - A blockage in the drain hose, pump filter, or elsewhere in the drainage system could prevent water from properly draining out during the wash cycle, leading to overflow.
- Faulty Inlet Valve - A faulty inlet valve might not be shutting off properly, allowing more water to enter the washer than necessary.
- Other Issues - Less likely, there could be problems with hoses, air pressure sensors (if your model has them), or the control board itself.
Troubleshooting Steps for E35 on Your Kenmore Washer
Important Safety Note - Before attempting any troubleshooting steps, unplug the washer from the outlet to avoid electrical hazards and potential water leaks.
- Check the Drain System - Look for any clogs in the drain hose or clean the drain pump filter (consult your manual for its location) to ensure proper drainage.
- Reset the Washer - A simple reset can sometimes clear temporary glitches that might be causing the E35 error. Unplug the washer from the outlet for a few minutes and then plug it back in.
Additional Tips
- Consult your Kenmore washer manual - If you have the user manual for your specific Kenmore washer model, look for a section on troubleshooting error codes. The manual might provide specific instructions for resolving E35 errors.
- Inspect the Water Inlet Hose - While less common, you can visually check the water inlet hose for any damage or cracks.
When to Consult a Qualified Appliance Repair Technician
If the above steps don't resolve the issue, consulting a qualified appliance repair technician is recommended. Here's why -
- Diagnosis Expertise - The technician can use their experience and tools to diagnose the exact cause of the overflowing, whether it's a faulty sensor, a clogged drain system, a malfunctioning valve, or another issue.
- Safe Repairs - Replacing a faulty sensor, cleaning a clogged drain deep within the system, or repairing a faulty valve might require some disassembly of the washer. A technician will have the knowledge and tools to do this safely and effectively.
- Preventing Further Damage - A washer that overflows can potentially lead to water damage to your laundry room or surrounding areas. Addressing the E35 error promptly can help prevent such damage.