Possible Causes of the dHE error:

• Sensor malfunction: 
  • The sensor responsible for monitoring the drying process might be faulty, leading to inaccurate readings and triggering the error.
• Ventilation blockage: 
  • Lint, debris, or other obstructions in the vent system can affect airflow and hamper proper drying, causing the error.
• Overloaded drum: 
  • Exceeding the recommended load capacity can impact drying performance and trigger the error.
• Software glitch: 
  • A temporary software issue might misinterpret sensor data and cause the error.
• Electrical issue: 
  • In rare cases, a minor electrical problem could affect sensor function and lead to the error.

Troubleshooting the dHE error code in LG Washing Machine

Important Note: Although some steps involve disconnecting the power cord, always prioritize safety. If you're uncomfortable with any tasks, seek professional assistance from an LG-authorized technician.

1. Turn off and unplug the washer for 30 seconds. 
   • This simple reset can often resolve temporary glitches.
2. Check the ventilation system: 
   • Ensure the exhaust vent is clear of lint, debris, and other obstructions. Clean the vent and filter according to your user manual.
3. Verify the load size: 
   • Weigh your laundry or use the provided measuring cup to ensure you haven't overloaded the drum.
4. Try a different drying cycle: 
   • Select a less intensive drying cycle (e.g., "Air Dry" or "Low Heat") and observe if the error persists.
5. Consult your user manual: 
   • Refer to the troubleshooting section specific to the dHE error code for tailored instructions based on your model.
6. Contact LG support: 
   • If the error persists after trying these steps, reach out to LG support for further assistance. They can provide guidance based on your model and potential warranty coverage.

Additional Tips:

• Regularly clean the lint filter and air vents to maintain optimal drying performance.
• Follow the recommended load capacities for different drying cycles to avoid overloading.
• Consider using dryer balls to improve airflow and reduce drying time.
• Update your washing machine's firmware if available, as it might address software bugs.

Remember:

• The dHE error usually signifies a temporary issue, and following the troubleshooting steps can often resolve it.
• Prioritize safety when performing any maintenance tasks.
• If the error persists or you're unsure about troubleshooting, contact LG support for professional assistance.