Possible causes of error E01:

• Closed water tap: 
  • Ensure the hot and cold water taps are fully open.
• Clogged inlet hoses: 
  • Debris might be blocking the water flow. Check the hoses for kinks or blockages near the machine and the water source.
• Clogged inlet valve filter: 
  • The filter screens at the water inlet valves can trap debris. Consult your Electrolux manual for instructions on locating and cleaning these filters.
• Faulty inlet valve: 
  • In rare cases, the inlet valve itself might be malfunctioning.

Troubleshooting the E01 error code in Electrolux Washing Machine

1. Check the water taps: 
   • Make sure both hot and cold taps are fully open and there's no water restriction at the source.
2. Inspect the hoses: 
   • Visually check for any kinks or blockages in the inlet hoses. Straighten them out if necessary.
3. Clean the inlet valve filters: 
   • Refer to your Electrolux manual for the specific location and cleaning instructions for these filters.
4. Restart the machine: 
   • After addressing any potential issues, turn off the washing machine, wait a few minutes, and then restart it. This can sometimes clear the error code.

If the error persists:

• Consult the user manual: Your Electrolux user manual will have more specific troubleshooting steps for your particular model.
• Contact Electrolux support: If none of the above solutions work, you might need to contact Electrolux support for further assistance. They can diagnose the problem and recommend the best course of action, which might involve a repair technician.

Additional tips:

• Be gentle when handling the hoses and avoid using sharp objects that could damage them.
• If you're unsure about any steps, it's always best to consult a qualified technician.

I hope this information helps!