Potential Causes of error E07:

• Water Overfill: The most common reason for E07 is an issue with the water intake system, leading to the drum filling beyond the intended level. This could be due to:
  • Faulty water inlet valve stuck open
  • Defective pressure sensor failing to signal full drum
  • Leak in the system allowing excess water entry
• Motor Problem: In some cases, E07 might indicate a motor issue:
  • Motor malfunction preventing proper draining
  • Blocked drain hose hindering water removal
  • Overloaded drum putting excessive strain on the motor

Troubleshooting the E07 error code in Electrolux Washing Machine

1. Identify Your Model: 
   • Pinpointing your specific Electrolux washing machine model is crucial. Look for the model number on a label on the machine's back or in your user manual.
2. Consult the User Manual: 
   • With your model number, refer to the Electrolux user manual for specific troubleshooting steps related to the E07 error code. It will provide detailed instructions based on your machine's design.
3. General Troubleshooting (Safety First): Remember to unplug the machine before any troubleshooting! Here are some general steps you can try:
   • Check for leaks: Visually inspect hoses and connections for any visible leaks.
   • Restart the machine: Sometimes, a simple restart can clear the error. Wait a few minutes after unplugging before restarting.
   • Reduce load size: An overloaded drum can strain the motor. Consider reducing the laundry amount for the next cycle.
   • Check drain hose: Ensure the drain hose is clear and not kinked, allowing proper water drainage.

Important Notes:

• Do not attempt repairs yourself: Unless you have electrical and appliance repair expertise, avoid DIY fixes. Incorrect repairs can worsen the problem and pose safety risks.
• Contact Electrolux Support: If the E07 error persists after trying these steps, it's highly recommended to contact Electrolux support for further assistance. They can provide model-specific guidance and potentially arrange for a qualified technician to diagnose and repair the issue safely.

I hope this helps!