Possible Meanings of error E32:

• Pressure Sensor Issue: Similar to error E31, E32 often indicates a problem with the pressure sensor (pressostat). This sensor monitors water levels in the drum throughout the cycle. In this case, E32 might suggest:
  • Faulty pressostat: The sensor itself is malfunctioning and not sending accurate readings.
  • Wiring or connection problem: Damaged or loose wiring between the sensor and the control board can disrupt communication.
  • Blockage in the air tube: Some models use an air tube connected to the pressostat; a blockage can affect sensor readings.
• Calibration Error: 
  • In some cases, E32 might signify a calibration issue with the pressure sensor. This means the sensor's readings might not be accurate, leading to the error.
• Control Board Problem: 
  • Rarely, E32 could indicate a fault with the main control board, which interprets sensor readings and controls the machine's functions.

Troubleshooting the E32 error code in Electrolux Washing Machine

1. Identify Your Model: 

• This is crucial as the specific troubleshooting steps and the meaning of E32 can vary depending on your model. Locate the model number on a label on the back of your machine or in your user manual.

2. Consult the User Manual: 

• With your model number, refer to your Electrolux user manual for specific troubleshooting instructions related to the E32 error code. It will provide detailed steps based on your machine's design and offer the most accurate information.

3. General Troubleshooting (Safety First! Unplug the machine):

• Restart the machine: Sometimes, a simple restart can clear the error. Wait a few minutes after unplugging before restarting.
• Check for leaks: Look for any visible water leaks around the hoses, connections, or the base of the machine.
• Inspect the air tube (if applicable): If your model uses an air tube, ensure it's clear and free of blockages.
• Check inlet hoses: Visually inspect for kinks, blockages, or leaks. Ensure they are securely connected.
• Open water taps fully: Verify both hot and cold taps are fully open.

4. Avoid DIY Repairs: Unless you have expertise in electrical and appliance repair, avoid DIY fixes for the E32 error. Incorrect repairs can worsen the problem and pose safety risks.

5. Contact Electrolux Support: If the error persists after trying these steps, it's highly recommended to contact Electrolux support. They can provide model-specific guidance and potentially arrange for a qualified technician to diagnose and repair the issue safely.

Remember:

• Prioritize your user manual: Always prioritize the instructions in your Electrolux user manual or from Electrolux support.
• Avoid DIY repairs: Electrical and appliance repair can be dangerous. If you're not comfortable troubleshooting, contacting Electrolux support is the safest option.

I hope this information helps!