The E35 error code on Electrolux washing machines typically indicates a problem with overfilling. This means the pressure sensor in the machine has detected that the water level is too high during the wash cycle. Here are the possible causes and troubleshooting steps:
Possible Causes of error E35:
- Faulty Water Inlet Valve:
- The valve might be stuck open, allowing more water than needed into the drum.
- Blocked Pressure Chamber:
- If the chamber connected to the pressure sensor gets clogged, it can misinterpret water levels.
- Faulty Pressure Sensor:
- The sensor itself could be malfunctioning and sending inaccurate readings to the control board.
- Leaking Hose or Connection:
- A leak somewhere in the system can cause water to bypass the sensor, leading to overfilling.
Troubleshooting the E35 error code in Electrolux Washing Machine
- Identify Your Model:
- This is crucial because troubleshooting steps and specific causes might vary depending on your model. Find the model number on the back of your machine or in the user manual.
- Consult the User Manual:
- With your model number, refer to the Electrolux user manual for specific instructions related to the E35 error code. It will offer detailed troubleshooting based on your machine's design.
- General Troubleshooting (Safety First! Unplug the machine):
- Check for leaks: Look for any visible water leaks around hoses, connections, or the machine's base.
- Inspect the inlet hose: Ensure it's not kinked or blocked.
- Restart the machine: Sometimes, a simple restart can clear the error. Wait a few minutes after unplugging before restarting.
Important Notes:
- Avoid DIY Repairs: Unless you have expertise in appliance repair, it's best to avoid DIY fixes for the E35 error. Incorrect repairs can worsen the problem and pose safety risks.
- Prioritize User Manual: Always prioritize instructions in your Electrolux user manual or from Electrolux support.
Seek Professional Help:
If the error persists after trying these steps, it's highly recommended to contact Electrolux support. They can provide model-specific guidance and potentially arrange for a qualified technician to diagnose and repair the issue safely.
Additional Tips:
- Avoid overloading the machine: This can put extra strain on the water system and increase the risk of overfilling.
- Use the correct detergent: Excessive suds from using too much or the wrong detergent can contribute to overfilling issues.
- Regularly clean the drain filter: This helps prevent blockages that might affect water flow and pressure readings.
Remember, identifying your specific model is crucial for accurate diagnosis and troubleshooting. I hope this information helps!