F5E4, dr
The F5E4 or "dr" error code on Whirlpool washing machines indicates a problem with the door not being opened between cycles. This means the machine has run for three consecutive cycles without the door being opened, which can trigger a safety feature.
Possible causes of F5E4/dr error:
- User didn't open the door:
- This is the most likely scenario. Perhaps you forgot to open the door after a cycle finished, or maybe you have a habit of running back-to-back washes without opening the door in between.
- Door not closing properly:
- If the door isn't sealing tightly, the washer might not register it as open, even if you physically open it.
- Faulty door switch:
- In rare cases, the switch that detects if the door is open or closed could be malfunctioning.
How to fix F5E4/dr error:
- Open and close the door:
- The first step is to simply open and close the door firmly. This can sometimes reset the sensor and allow you to restart the cycle.
- Check for obstructions:
- Look around the door frame and seal for any debris or objects that might be preventing it from closing properly. Remove any obstructions you find.
- Clean the door seal:
- Over time, the door seal can accumulate dirt and debris, which can affect its ability to create a tight seal. Wipe down the seal with a damp cloth.
- Run a diagnostic cycle:
- Some Whirlpool models have a diagnostic cycle that can test the door switch and other components. Refer to your user manual for instructions on how to run this cycle.
- Reset the washer:
- Unplug the washer for a few minutes, then plug it back in and restart the cycle. This can sometimes clear minor glitches.
- Contact Whirlpool support:
- If the error persists after trying these steps, it's best to contact Whirlpool support or a qualified appliance technician. They can diagnose the issue accurately and recommend necessary repairs, potentially involving replacing the door switch.
Additional notes:
- This error code might be displayed as F5 E4 or simply "dr" depending on your model.
- It's important to note that running multiple cycles without opening the door can trap moisture and odors inside the machine, potentially leading to mold or mildew growth.
- Always prioritize safety. Do not attempt to tamper with electrical components or the door lock mechanism if you're unsure about any procedures.
By understanding the meaning of the F5E4/dr error code and following these steps, you should be able to resolve the issue and get your Whirlpool washing machine back to its normal operation.