Possible Causes of error F8E3:

• Faulty water inlet valve: 
  • The valve that controls the water flow might be malfunctioning, allowing excessive water to enter.
• Clogged drain hose or filter: 
  • If the drain hose or filter is blocked, water might back up and trigger the overflow sensor.
• Faulty pressure sensor: 
  • The sensor that measures water level could be malfunctioning, leading to inaccurate readings and potential overflow.
• Software glitch: 
  • In rare cases, a temporary software glitch could be causing the issue.

Troubleshooting the F8E3 error code in Whirlpool Washing Machine

Before attempting any steps, ensure the washer is unplugged and completely cool.

1. Turn off the water supply: 
   • Locate the shut-off valve for the washing machine and turn it off to prevent further water flow.
2. Check for leaks: 
   • Inspect the machine for any visible leaks around the hoses, connections, or drum.
3. Clean the drain hose and filter: 
   • Locate the drain hose and filter, usually at the bottom front of the machine. Clean them thoroughly to remove any debris that might be causing blockage.
4. Restart the washer: 
   • Sometimes, a simple restart can clear minor glitches. Unplug the washer for a few minutes, then plug it back in and restart the cycle.
5. Consult your user manual: 
   • Refer to your specific model's manual for detailed troubleshooting steps or error code explanations relevant to your machine.
6. Seek professional help: 
   • If the error persists after trying these steps, or you're uncomfortable performing any checks, it's crucial to contact Whirlpool support or a qualified appliance technician. They have the expertise to diagnose the specific issue accurately and recommend necessary repairs, potentially involving replacing faulty components or updating software.

Additional Notes:

• Always prioritize safety. Never attempt repairs involving electrical components or water connections if unsure about any procedures.
• If your washer is under warranty, contact Whirlpool support before any repairs.
• The specific troubleshooting steps for the F8E3 code might vary depending on your model year and type. Refer to your user manual for the most accurate and relevant information.
• Some online resources suggest attempting a "reset" procedure, but it's crucial to note that these often involve manipulating internal components or connections, which can be risky and void your warranty. Always prioritize professional help for complex procedures.

Remember, while troubleshooting the F8E3 error code yourself is possible in some cases, seeking professional help can ensure accurate diagnosis and safe repairs. Understanding the meaning of the code and following these steps will guide you towards resolving the issue and getting your Whirlpool washing machine back in top working order.