LE
An LE error code on a Kenmore washer signifies a lock error. This indicates the washer's control board has detected an issue preventing the tub from spinning properly. There are several reasons why this might happen
- Overloaded washer - If you've crammed too many clothes into the washer, the motor might struggle to spin the tub. Try removing some items and restarting the cycle.
- Excessive detergent - Using too much detergent can create excessive suds, which can interfere with the spinning process. If you see a lot of suds, let the washer sit for 30 minutes to allow the foam to subside. Then, run a drain and spin cycle to get rid of the sudsy water.
- Obstruction in the washer - An object stuck between the inner and outer tub can prevent the tub from spinning. Check the drain filter for any foreign objects that might be causing the blockage.
- Drive system issues - Loose wiring connections or a malfunctioning drive motor or tachometer (a sensor that monitors motor speed) could also be causing the LE error.
Here's how to troubleshoot the LE error
- Check for overload - Remove some clothes if the washer seems overloaded.
- Reduce suds - If there's excessive suds, follow the steps mentioned earlier to get rid of them.
- Inspect for obstructions - Check the drain filter for any objects that might be stuck.
- Manually rotate the tub - With the washer unplugged, open the door and see if you can rotate the tub by hand. If it spins freely, the issue might be with the motor or tachometer.
If you've tried these steps and the LE error persists, it's advisable to consult a qualified appliance repair technician for further assistance.