The F/11 error code on a Kenmore washer indicates a communication problem between the control board and the motor control board. Essentially, the "brain" of the washer (control board) isn't talking properly to the component that controls the motor (motor control board). This can prevent the washer from functioning correctly during the wash cycle.

Here's a breakdown of the possible causes and troubleshooting steps for the F/11 error

Possible Causes of F/11 Error

• Loose wire connection - Electrical connections between the control board and the motor control board might be loose or damaged, disrupting communication and causing the error.
• Faulty control board - The control board itself might be malfunctioning and unable to send the correct signals to the motor control board.
• Faulty motor control board - The motor control board might be defective and unable to receive or interpret signals from the control board.
• Less likely (Faulty motor) - In rare cases, the motor itself might be malfunctioning, but this is less likely to cause an F/11 error specifically.

The F/09 error code on a Kenmore washer indicates a problem with the water pump or its communication with the control board. This means the washer is struggling to drain the water effectively during the wash cycle, and the control board might not be receiving the correct signals from the pump. Here's a breakdown of the possible causes and troubleshooting steps -

Possible Causes of F/09 Error

• Clogged drain pump or filter - The drain pump filter or hose might be clogged with debris like lint, coins, or buttons, preventing the water from draining out effectively.
• Faulty drain pump - The drain pump itself might be malfunctioning due to electrical problems, worn-out parts, or a blockage within the pump mechanism. This can hinder its ability to drain the water properly.
• Loose electrical connections - Electrical connections between the drain pump and the control board might be loose or damaged, disrupting communication and causing the F/09 error.
• Less likely (Control board issue) - In rare cases, the control board itself might be malfunctioning and unable to properly communicate with the drain pump.

The F/06 error code on a Kenmore washer can indicate a problem with the motor speed control system. This means the washer's control board is having difficulty regulating the speed of the motor during the wash cycle. Here's a breakdown of the possible causes and troubleshooting steps:

Possible Causes of F/06 Error

• Drive motor issue - The drive motor itself might be malfunctioning due to electrical problems, worn-out parts, or internal wear and tear. This can prevent the motor from reaching the desired speeds during different wash cycle stages.
• Faulty motor control board - The control board that sends signals to regulate the motor speed might be defective, causing it to send incorrect signals or malfunction altogether.
• Wiring problems - Loose or damaged wiring between the motor and the control board could disrupt communication and lead to the F/06 error.
• Tacho sensor malfunction (less likely) - In some models, a tacho sensor might be present to monitor the motor's speed. If this sensor malfunctions, the control board might not receive accurate information about the motor's speed, leading to the error code.

The meaning of the F/05 error code on a Kenmore washer can vary depending on the specific model. In some Kenmore washers, F/05 might indicate a problem with the water temperature sensor, while in others, it could signify a malfunction with the lid lock or door switch.

Here's a breakdown of the two possible interpretations and troubleshooting steps:

The F/02 error code on a Kenmore washer indicates a drainage issue. It signifies that the washer is unable to drain the water properly during the wash cycle. This could lead to several problems, including:

• Overflowing washer - The washer might continue to fill with water even though the tub is already full if it can't drain properly, potentially causing a mess.
• Ineffective washing - Clothes won't be rinsed and spun effectively if the washer can't drain the dirty wash water.
• Mold or mildew growth - Excess moisture left in the washer due to improper draining can create a breeding ground for mold and mildew.

Here's a breakdown of the possible causes and troubleshooting steps for the F/02 error.

Possible Causes of F/02 Error

• Clogged drain pump or filter - The drain pump filter or hose might be clogged with debris like lint, coins, or buttons, preventing the water from draining out effectively.
• Faulty drain pump - The drain pump itself might be malfunctioning due to electrical problems, worn-out parts, or a blockage within the pump mechanism.
• Clogged drain hose - The hose that carries wastewater from the washer to the drainpipe might be clogged with debris or kinked, restricting water flow.
• Blocked drainpipe - The drainpipe itself, located in your house plumbing system, might be clogged with debris or a buildup of soap scum, preventing the washer's wastewater from draining properly.

The F/H error code on a Kenmore washer indicates an issue with the water filling system. It signifies that the washer is not detecting the correct amount of water entering the washer during a cycle. Here's a breakdown of the possible causes and solutions

Meaning of F/H Error

• Water Filling Problem - The washer is not filling with enough water to properly clean the clothes. This could be due to several reasons related to the water supply or the washer itself.

Possible Causes of F/H Error

• Water supply issue
  • Closed shut-off valves - The hot and/or cold water supply valves behind the washer might be closed, preventing water from entering.
  • Low water pressure - There might be insufficient water pressure coming from the house's main supply. This could be due to a partially closed valve somewhere in your plumbing system, or a problem with the municipal water supply.
  • Clogged water inlet hoses - The hoses that connect the washer to the water supply might be clogged with debris, restricting water flow.
• Washer malfunction
  • Faulty water inlet valve - The valve that controls the water flow into the washer might be malfunctioning and not opening properly.
  • Faulty pressure sensor - The sensor that monitors the water level in the washer might be defective and sending incorrect signals to the control board, causing the washer to stop filling before enough water is present.
  • Control board issue (less likely) - In rare cases, the control board might be malfunctioning and misinterpreting signals related to water filling.

The Spin LED on a Kenmore washer typically signifies that the washer is currently in the spin cycle. Here's a breakdown of what the Spin LED indicates

• Spin Cycle Active - When the Spin LED is illuminated, it means the washer is actively spinning the drum at high speed to remove excess water from the clothes after the wash cycle. This helps the clothes to dry more quickly when removed from the washer.
• Spin Speed - The Spin LED might stay on consistently during the spin cycle, or it might blink or change intensity depending on the spin speed selected (high, medium, low) on some models. Consult your washer's user manual for specific details about LED behavior for your model.

The Wash LED on a Kenmore washer typically signifies that the washer is currently in the wash cycle. Here's a breakdown of what the Wash LED indicates:

• Wash Cycle Active - When the Wash LED is illuminated, it means the washer is actively performing the washing portion of the wash cycle. This involves agitating the clothes in the washer drum with water and detergent to remove dirt and stains.
• Wash Cycle Stage - Depending on your Kenmore washer model, the Wash LED might stay on throughout the entire wash cycle, or it might blink or turn off during certain stages (like pre-wash or rinse) while remaining lit for the main wash portion. Consult your washer's user manual for specific details about LED behavior for your model.

The F9 E2 error code on your Kenmore washer indicates a problem with the drain pump and its communication with the control board. This means the washer is likely experiencing issues draining the water during the wash cycle, and the control board might not be receiving the correct signals from the drain pump.

Here's a breakdown of the possible causes and troubleshooting steps for the F9 E2 error.

Possible Causes of F9 E2 Error

• Clogged drain pump or filter - The drain pump filter or hose might be clogged with debris like lint, coins, or buttons, preventing the water from draining out effectively and potentially causing communication issues with the control board.
• Faulty drain pump - The drain pump itself might be malfunctioning due to electrical problems, worn-out parts, or a blockage within the pump mechanism, leading to drainage problems and potentially disrupting communication with the control board.
• Loose electrical connections - Electrical connections between the drain pump and the control board might be loose or damaged, hindering communication and causing the error code.
• Less likely (Control board issue) - In rare cases, the control board itself might be malfunctioning and unable to properly communicate with the drain pump.

The F9 E1 error code on your Kenmore washer indicates a problem with the washer's drainage system. It signifies that the washer is taking too long to drain the water during the wash cycle.

Here's a breakdown of the possible causes and troubleshooting steps for the F9 E1 error:

Possible Causes of F9 E1 Error

• Clogged drain pump or filter - The drain pump filter or hose might be clogged with debris like lint, coins, or buttons, preventing the water from draining out effectively.
• Faulty drain pump - The drain pump itself might be malfunctioning due to electrical problems, worn-out parts, or a blockage within the pump mechanism.
• Clogged drain hose - The hose that carries wastewater from the washer to the drainpipe might be clogged with debris or kinked, restricting water flow.
• Blocked drainpipe - The drainpipe itself, located in your house plumbing system, might be clogged with debris or a buildup of soap scum, preventing the washer's wastewater from draining properly.
• Less likely (Pressure switch issue) - In rare cases, a faulty pressure switch that monitors the water level in the washer might be malfunctioning and sending incorrect signals to the control board, causing the error.