Your Error Fix Hub

The error code F0 E2 on your Kenmore washer signifies an oversudsing issue. This means the washer has detected an excessive amount of suds during the wash cycle. Excessive suds can prevent the washer from cleaning clothes effectively and can also lead to overflow during the spin cycle.

Here's a breakdown of the reasons why this error might occur and how to troubleshoot it -

Possible Causes of F0 E2 Error

• Improper detergent usage - Using too much detergent, especially high-efficiency (HE) detergent in a non-HE washer, can lead to excessive sudsing.
• Wrong type of detergent - Using regular detergent in a high-efficiency (HE) washer can create a lot of suds. Always use HE detergent formulated for automatic washers.
• Clogged drain pump or filter - A clogged drain pump or filter can prevent sudsy water from draining out properly during the wash cycle, contributing to overflow and triggering the F0 E2 error.

A flashing Lid Lock LED on your Kenmore washer indicates an issue with the lid lock mechanism, preventing the washer from starting a cycle. Here's a breakdown of the possible reasons and troubleshooting steps -

Possible Reasons for Flashing Lid Lock LED

• Improperly closed lid - The most common reason is simply an unsecured lid. Ensure the washer door is firmly shut and all latches are engaged.
• Foreign object obstructing latch - Sometimes, laundry items or debris caught between the door and the door seal can prevent the lid from closing properly and engaging the lock.
• Faulty lid lock mechanism - If the lock itself is malfunctioning, it might not be able to secure the door even when it's shut.
• Loose connections - Electrical connections between the lid lock and the control board might be loose or damaged, disrupting communication.

The meaning of the CL error code on a Kenmore washer depends on the washer model. There are two main possibilities -

1. Control Lock - In many newer Kenmore washer models, the CL error code signifies a control lock activation. This means the control panel has been intentionally disabled, likely to prevent accidental setting changes during the wash cycle or by children.
2. Clean Washer Reminder (Less Likely) - In some older Kenmore washer models, particularly washers in the 110 series, the CL error code might indicate a clean washer reminder. This is a prompt to run a cleaning cycle to remove detergent buildup and potential odors from the washer tub.

Here's how to determine which meaning applies to your washer

• Consult your user manual - The most accurate way to determine the meaning of the CL error code for your specific Kenmore washer model is to refer to the user manual. It will explain what the code signifies and how to deactivate the control lock or run a cleaning cycle (if applicable).
• Look for model number - If you don't have the user manual readily available, locate the model number of your Kenmore washer. This is usually a sticker or label on the back of the washer or behind the washer door. You can then search online for troubleshooting resources specific to your model number and the CL error code.

On a Kenmore washer, the error code PF indicates a power failure. This means the washer detected a disruption in the electrical supply during the wash cycle.

Possible Causes of PF Error

• Brief power outage - A momentary power fluctuation or a short power outage can cause the washer to shut down and display the PF error.
• Loose or faulty electrical connection - The connection between the washer's power cord and the wall outlet might be loose or damaged, causing an interruption in power supply.
• Internal electrical issue (less likely) - In rare cases, an internal electrical fault within the washer itself could be causing the power disruption.

The error code EE on a Kenmore washer signifies an issue with the EEPROM (Electrically Erasable Programmable Read-Only Memory) on the main control board. The EEPROM essentially stores the washer's program settings and operating instructions. Here's a breakdown of what the EE error code means and how to troubleshoot it -

What is EEPROM and Why Does It Cause Errors?

The EEPROM is a non-volatile memory chip that retains information even when the washer is turned off. It holds crucial data for the washer's control board to function properly, including wash cycle settings, spin speeds, and other operational parameters.

If the EEPROM becomes corrupted or damaged, the control board might not be able to access or process the stored information correctly, leading to malfunctions and the EE error code.

Possible Causes of EE Error

• Corrupted EEPROM - This is the most common reason for the EE error. Over time, due to various factors like voltage fluctuations or internal glitches, the data stored on the EEPROM can become corrupted.
• Faulty control board - In some cases, the error might indicate a malfunction with the main control board itself, not just the EEPROM.

The error code TE on a Kenmore washer indicates a problem with the heating element or the thermistor. The thermistor is a temperature sensor that monitors the water temperature inside the washer tub.

Possible Causes of TE Error

• Faulty thermistor - If the thermistor itself is malfunctioning, it might be sending incorrect signals to the control board, causing the TE error even if the heating element is functioning properly.
• Faulty heating element - If the heating element is broken or malfunctioning, it won't be able to heat the water during the wash cycle, triggering the TE error.
• Loose connections - Electrical connections between the thermistor, heating element, and the control board might be loose or damaged, disrupting communication.

The error code dE2 on a Kenmore washer indicates a door lock error, similar to dE and dE1. However, dE2 specifically points towards a scenario where the door is closed, but the washer isn't detecting it as securely locked.

Here's a breakdown of the dE2 error and how to troubleshoot it

Possible Causes of dE2 Error

• Faulty door lock mechanism - If the lock itself is malfunctioning, it might not be able to fully engage or signal a secure closure even when the door is shut.
• Misalignment of door or lock - Over time, the door or the lock mechanism might become misaligned, preventing a proper lock even when the door is closed.
• Worn door seal - A damaged or worn door seal might not create a proper seal with the washer body, which can interfere with the lock mechanism's ability to detect a secure closure.
• Electrical connection issues - Loose or damaged electrical connections between the door lock and the control board might disrupt communication, even if the lock is physically engaged.

The error code dE1 on a Kenmore washer signifies the same issue as dE - a door lock error. This means the washer's control board isn't detecting a secure closure of the washer door.

Possible Causes of dE1 Error

• Door not properly closed - This is the most common reason for the dE1 error. Ensure the washer door is firmly shut and all latches are engaged.
• Foreign object obstructing latch - Sometimes, debris or laundry items caught between the door and the door seal can prevent a proper lock.
• Faulty door lock mechanism - If the door lock itself is malfunctioning, it might not be able to secure the door properly.
• Loose connections - Electrical connections between the door lock and the control board might be loose or damaged, disrupting communication.

The error code dE on a Kenmore washer typically indicates a door lock error. This means the washer's control board isn't detecting a secure closure of the washer door. The washer won't start a cycle if it can't ensure the lid or door is properly locked to prevent leaks during the wash process.

Possible Causes of dE Error

• Door not properly closed - This is the most common reason for the dE error. Ensure the washer door is firmly shut and all latches are engaged.
• Foreign object obstructing latch - Sometimes, debris or laundry items caught between the door and the door seal can prevent a proper lock.
• Faulty door lock mechanism - If the door lock itself is malfunctioning, it might not be able to secure the door properly.
• Loose connections - Electrical connections between the door lock and the control board might be loose or damaged, disrupting communication.

The error code PE on a Kenmore washer indicates a problem with the water level sensor or issues with water level pressure. The water level sensor is a crucial component that detects the amount of water in the washer during the wash cycle.

Here's a breakdown of what the PE error code means and how to troubleshoot it:

Possible Causes of PE Error:

• Faulty water level sensor - If the sensor itself is malfunctioning, it might send incorrect signals to the control board, leading to the PE error.
• Clogged water pressure hose - A hose connected to the water level sensor can become clogged with debris, preventing the sensor from functioning properly.
• Loose connections - Electrical connections between the water level sensor and the control board might be loose or damaged, disrupting communication.
• Faulty control board (less likely) - In rare cases, the control board that receives signals from the water level sensor might be malfunctioning.