Your Error Fix Hub

The error code FE on a Kenmore washer signifies a water overflow error. This means the washer has detected that the water level has risen above the safe limit during the wash cycle. There could be several reasons why this is happening

• Faulty water level sensor - The water level sensor monitors the amount of water in the washer tub. If it's malfunctioning, it might send incorrect signals to the washer, causing it to overfill.
• Faulty water inlet valve - The water inlet valve controls the flow of water into the washer. If it's malfunctioning, it might not shut off properly, leading to overfilling.
• Clogged drain pump or filter - A clogged drain pump or filter can prevent water from draining out properly during the wash cycle, which can contribute to overflow.
• Defective air pressure switch (in some models) - In some Kenmore washer models, an air pressure switch monitors the water level based on air pressure within the tub. If this switch is faulty, it might not signal the washer to stop filling when the appropriate water level is reached.

The error code UE on a Kenmore washer indicates an unbalanced load. This means the washer has detected that the clothes inside the washer are unevenly distributed, which can cause the washer to vibrate excessively during the spin cycle. This vibration can potentially damage the washer or lead to errors during the spin cycle.

The error code "SF" on a Kenmore washer can have two possible meanings depending on the specific model you have. Here's a breakdown of both possibilities:

1. Sud Fault (More Likely) - In many Kenmore washer models, particularly newer ones, the SF error code signifies a sud fault. This is similar to the "Sud" error code on some washers and indicates an issue with excessive suds during the wash cycle. This can prevent the washer from cleaning clothes effectively and could also lead to overflow during the spin cycle.
2. Sensor Fault (Less Likely) - In some older Kenmore washer models, particularly washers in the 110 series, the SF error code might indicate a more general sensor fault. This could be a problem with the water level sensor, pressure sensor, or another sensor that monitors the washer's functions.

The error code AE on a Kenmore washer typically indicates a problem with water leakage. This can be due to a few reasons:

• Faulty water level sensor - The water level sensor monitors the amount of water in the washer tub. If it's malfunctioning, it might send incorrect signals to the washer, causing it to overfill and leak.
• Leaking drain hose - A damaged or loose drain hose can leak water from the washer.
• Clogged drain pump filter - A clogged filter can prevent proper drainage, leading to overflow and potential leaks.
• Faulty drain pump - A malfunctioning drain pump might not be able to pump out water effectively, causing the washer to overfill and leak.
• Leak around the door seal - Over time, the door seal on a washer can wear out or become damaged, allowing water to leak out during the wash cycle.

The "Sud" error code on a Kenmore washer indicates an issue with excessive suds during the wash cycle. This can prevent the washer from cleaning clothes effectively and could also lead to overflow during the spin cycle.

Here's what the Sud error code means and how to troubleshoot it

Causes of Sud Error

• Too much detergent - Using more detergent than recommended for your washer model and load size can create excessive suds. High-efficiency (HE) washers typically require much less detergent than traditional washers.
• Non-HE detergent - If you're using a regular detergent in a high-efficiency (HE) washer, it can create excessive suds because HE detergents are formulated to produce lower suds.
• Incorrect detergent type - Using fabric softener or other laundry additives that aren't designed for automatic washers can also contribute to suds buildup.

The meaning of the 2E error code on a Kenmore washer can depend on the specific model you have. There are two main possibilities

1. Drain Error (Most Common) - In most Kenmore washer models, particularly newer ones, the 2E error code signifies a drain error. This means the washer is unable to drain the water used during the wash cycle effectively. Here are some common reasons for a drain error:
   • Clogged drain pump filter - The drain pump filter traps debris like coins, buttons, or lint that might have gotten loose during washing. A clogged filter can prevent proper water drainage.
   • Kinked drain hose - If the drain hose is bent or twisted, it can restrict the water flow and hinder drainage.
   • Blocked drain pipe - The drain pipe that connects the washer to your home's drainage system could be clogged with debris, preventing water from flowing out.
   • Faulty drain pump - In some cases, the drain pump itself might be malfunctioning and unable to pump out the water.
2. Water Overflow Error (Less Common) - In some older Kenmore washer models, particularly washers in the 110 series, the 2E error might indicate a water overflow error. This could be due to a faulty water level sensor or a problem with the water inlet valve that keeps the washer from stopping the water intake at the appropriate level.

The error code nF1 on your Kenmore washer indicates a problem with the washer not filling with water properly. There could be several reasons why this is happening. Here's a breakdown of what nF1 means and how to troubleshoot it:

What nF1 Means

• nF - This typically stands for "no fill" in washer error codes.
• 1 - This number might indicate a specific variant of the no fill issue or could be a unique identifier for the error code in Kenmore washers.

Possible Causes of nF1 Error

• Closed water supply - Double-check that the hot and cold water supply valves behind the washer are fully turned on.
• Clogged water inlet screens - These screens are located where the water hoses connect to the washer. If they're clogged with debris, it can restrict water flow.
• Kinked or damaged water hoses - Inspect the hoses for any kinks or cracks that might be hindering water flow.
• Faulty water inlet valve - The valve controls water entering the washer. If it's malfunctioning, it might not open properly.
• Low water pressure - If your home's water pressure is too low, it could prevent the washer from filling adequately.

On a Kenmore washer, the error code "tE" typically indicates a thermistor error. The thermistor is a sensor that monitors the water temperature inside the washer. A tE error signifies the control board is not receiving a proper signal from the thermistor, which could be due to a malfunctioning thermistor or a loose connection.

Here's what a tE error might mean:

• Faulty thermistor - The thermistor itself might be malfunctioning and sending incorrect temperature readings to the control board.
• Loose connection - The wires connecting the thermistor to the control board might be loose or damaged, preventing a proper signal from being sent.

On a Kenmore washer, the error code "ds" most likely indicates a door switch error. This means the washer's control panel isn't receiving a signal that the door is securely shut. Like the E2 error code in some Kenmore models, a properly closed and locked door is essential for the washer to operate safely and prevent leaks during the wash cycle.

The meaning of E2 on a Kenmore washer can depend on the specific model you have. There are two main possibilities -

• Door Lock Error - In many Kenmore washer models, particularly front-load washers, E2 signifies a door lock error. This means the washer's control board isn't detecting a secure closure of the washer door. The washer won't start a cycle if it can't ensure the door is properly locked to prevent leaks during the wash process.
• Drain Issue (Less Common) - In some older Kenmore washer models, particularly washers in the 110 series, E2 might indicate a drain issue. This could be due to a clogged drain hose, drain pump malfunction, or a problem with the water level sensor.