Your Error Fix Hub

The E67 error code on your Kenmore washer typically indicates an issue related to the heater circuit or the water temperature sensor. Since Kenmore washers are manufactured by Whirlpool, the meaning of E67 aligns with Whirlpool's system. Here's a breakdown of what the E67 error signifies

• Heater Circuit or Water Temperature Sensor Fault (E67) - The E67 code suggests a problem within the system that controls the water heating process during the wash cycle. There are two main possibilities:
  • Heater Circuit Malfunction - The electrical circuit responsible for powering the heating element might be malfunctioning. This could be due to a faulty heating element itself, a broken wire connection, or an issue with the control board that regulates the heater.
  • Water Temperature Sensor Issue - The sensor that monitors the water temperature in the washer might be malfunctioning. This could lead to inaccurate temperature readings, causing the control board to stop the heating process prematurely or not initiate it at all.

Symptoms That Might Accompany E67 Error

In addition to the E67 error code on the display, you might notice some of these symptoms -

• Cold Wash Cycles - If the heater circuit isn't functioning properly, the wash water might not reach the intended temperature during the wash cycle.
• Incomplete Wash Cycles - The washer might stop the wash cycle prematurely due to issues with water temperature regulation.

The E5E error code on your Kenmore washer indicates a communication problem between the main control board and the speed control board. This is consistent with the meaning of E5E for Whirlpool washers, since Kenmore washers are manufactured by Whirlpool.

Here's a breakdown of what the E5E error signifies

• Communication Error (E5E) - The control board, which is the brain of the washer, relies on communication with the speed control board to regulate the motor's speed during different wash cycle stages. The E5E error suggests this communication has broken down, preventing the washer from functioning properly.

There are a couple of reasons why this communication breakdown might happen

• Wiring Issues - Problems with the wiring harness that connects the main control board to the speed control board could disrupt the signal transmission.
• Faulty Control Board or Speed Control Board - In some cases, one of the control boards themselves might be malfunctioning and not sending or receiving signals properly.

The E5A error code on your Kenmore washer indicates an issue related to water intake during the wash cycle. While information specific to Kenmore washers might be limited, here's a breakdown of what the E5A error typically signifies based on its meaning in Whirlpool washers (since Kenmore washers are manufactured by Whirlpool)

• Water Intake Problem (E5A) - The E5A code suggests the washer isn't able to fill with enough water to begin the wash cycle. There are a couple of reasons why this might happen -
  • Shut-Off Valves - The water supply shutoff valves for the hot and cold water lines might be closed or not fully open, preventing water from entering the washer.
  • Water Pressure Issues - Low water pressure from the house's main supply could hinder the washer from filling adequately.
  • Clogged Inlet Hoses - If the hoses that connect the washer to the hot and cold water supply lines are clogged with debris, it could restrict water flow.
  • Faulty Water Inlet Valve - The water inlet valve is responsible for controlling the flow of water into the washer. A malfunctioning valve could prevent it from opening properly.
  • Control Board Issue - In rare cases, the control board might be malfunctioning and not sending the correct signal to the water inlet valve.

The E59 error code on your Kenmore washer indicates an issue with the communication between the drive motor and the control board. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E59 code aligns with Whirlpool's system. Here's a breakdown of what the E58 error signifies

• Drive Motor Communication Error (E59) - The E59 code suggests the control board isn't receiving the necessary signal from the drive motor. This signal typically indicates the motor's speed (RPMs) and allows the control board to regulate its function during the wash and spin cycles. There are a couple of reasons why this communication breakdown might happen -
  • Faulty Motor Tachometer - The drive motor usually has a tachometer, a component that monitors the motor's speed and transmits that information to the control board. A malfunctioning tachometer could lead to a lack of signal.
  • Wiring Issues - Problems with the wiring between the drive motor and the control board could disrupt the signal transmission.
  • Less Likely - In rare cases, the control board itself might be malfunctioning and not interpreting the motor signal properly.

The E58 error code on your Kenmore washer typically indicates a problem with the drive motor's current. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E58 code aligns with Whirlpool's system. Here's a breakdown of what the E58 error signifies

• High Motor Current (E58) - The E58 code suggests the washer's control board has detected a higher than normal electrical current draw from the drive motor. This could prevent the washer from agitating the clothes properly during the wash cycle or spinning them effectively during the spin cycle. There are a couple of reasons why this might happen
  • Jammed Motor - A foreign object lodged within the motor or a worn-out motor bearing could cause the motor to strain and draw more current.
  • Faulty Motor Windings - Internal issues within the motor's windings (the wires that carry electricity) could create resistance and lead to a higher current draw.

The E57 error code on your Kenmore washer typically indicates an issue with the inverter that controls the drive motor. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E57 code aligns with Whirlpool's system. Here's what the E57 error signifies

• High Current on Inverter (E57) - The E57 code suggests the washer's control board has detected a higher than normal electrical current draw from the inverter circuit. The inverter is an important component in modern washing machines. It regulates the power supply to the drive motor, allowing for variable speeds and improved efficiency during the wash and spin cycles.

There are a couple of reasons why a high current draw might be happening

• Faulty Drive Motor - Issues within the drive motor itself, such as jammed components or failing windings, could cause the motor to draw more current than the inverter can handle.
• Inverter Malfunction - The inverter itself might be malfunctioning and not regulating the current properly.
• Less Likely - In rare cases, the wiring between the inverter and the motor control board could be faulty, leading to improper current flow.

The E56 error code on your Kenmore washer typically indicates a problem with the washer's motor. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E56 code aligns with Whirlpool's system. Here's a breakdown of what the E56 error signifies

• Motor Issue (E56) - The E56 code suggests the washer's control board has detected an abnormality with the drive motor. This could prevent the washer from agitating the clothes properly during the wash cycle or spinning them effectively during the spin cycle. There are a couple of reasons why this might happen -
  • High Motor Current - The E56 code often indicates the control board is detecting a higher than normal electrical current draw from the motor. This could be due to -
    • Jammed Motor - A foreign object lodged within the motor or a worn-out motor bearing could cause the motor to strain and draw more current.
    • Faulty Motor Windings - Internal issues within the motor's windings (the wires that carry electricity) could create resistance and lead to a higher current draw.
  • Less Likely - In some cases, the E56 code might indicate a problem with the motor control board itself, which is responsible for sending signals to the motor.

The E48 error code on your Kenmore washer indicates an issue with the drive motor, which is responsible for spinning the drum during the wash and spin cycles. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E48 code aligns with Whirlpool's system. Here's a breakdown of what the E48 error signifies

• Drive Motor Problem (E48) - The E48 code suggests a malfunction with the drive motor. This could prevent the washer from agitating the clothes properly during the wash cycle or spinning them effectively during the spin cycle. There are a couple of reasons why this might happen -
  • Open Winding - A break or malfunction within the wires (windings) of the drive motor could disrupt the flow of electricity, hindering its functionality.
  • Faulty Drive Motor - The drive motor itself might be failing due to wear and tear or other internal issues.

The E47 error code on your Kenmore washer typically indicates an issue with the door lock circuit during the spin cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E47 code aligns with Whirlpool's system. Here's a breakdown of what the E47 error signifies

• Door Lock Circuit Problem (E47) - The E47 code suggests the washer's control board isn't detecting a secure lock on the washer door during the spin cycle. This could be due to several reasons -
  • Faulty Door Latch - A malfunctioning door latch might not be engaging properly, preventing a secure lock.
  • Wiring Issues - Problems with the wiring between the door latch and the control board could be preventing a proper signal.
  • Control Board Issue - Less likely, there could be a problem with the control board itself that's not interpreting the door lock signal correctly.

The E43 error code on your Kenmore washer typically indicates a problem with the washing machine's spin cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E43 code aligns with Whirlpool's system. Here's what the E43 error signifies

• Spin Cycle Issue (E43) - The E43 code suggests the washer is unable to spin the drum properly during the spin cycle. This could prevent the clothes from reaching their final level of dryness and might wrinkle them more. There are several reasons why this could happen -
  • Blocked Drain System - A blockage in the drain hose, pump filter, or elsewhere in the drainage system could prevent the washer from removing enough water before the spin cycle. This extra water weight can hinder the drum's ability to spin effectively.
  • Uneven Load Distribution - An unbalanced load of laundry can cause the washer to vibrate excessively during the spin cycle. The washer might stop spinning to prevent damage due to the imbalance.
  • Faulty Door Switch - A malfunctioning door switch might not be properly registering that the washer door is closed. For safety reasons, the washer won't start the spin cycle if the control board doesn't sense a closed door.
  • Drive System Problems - Less likely, there could be issues with the drive motor, belt, or other components responsible for rotating the drum.