Your Error Fix Hub

On a Kenmore washer, the dc error code indicates an unbalanced load. This means the washer has detected that the clothes inside the washer are unevenly distributed, which can cause the washer to vibrate excessively during the spin cycle. This vibration can potentially damage the washer or lead to errors during the spin cycle.

An OE error code on a Kenmore washer signifies a drain error. This means the washer is unable to drain the water used during the wash cycle effectively. There could be several reasons behind this:

• Clogged drain pump filter - The drain pump filter traps debris like coins, buttons, or lint that might have gotten loose during washing. A clogged filter can prevent proper water drainage.
• Kinked drain hose - If the drain hose is bent or twisted, it can restrict the water flow and hinder drainage.
• Blocked drain pipe - The drain pipe that connects the washer to your home's drainage system could be clogged with debris, preventing water from flowing out.
• Faulty drain pump - In some cases, the drain pump itself might be malfunctioning and unable to pump out the water.

On a Kenmore washer, the IE error code indicates an issue with water intake. This means the washer isn't filling with water properly to complete the wash cycle.

Here are the common reasons behind an IE error

• Closed water supply valves - Double-check that the hot and cold water supply valves behind the washer are fully turned on.
• Clogged water inlet screens - These screens are located where the water hoses connect to the washer. If they're clogged with debris, it can restrict water flow.
• Kinked or damaged water hoses - Inspect the hoses for any kinks or cracks that might be hindering water flow.
• Faulty water inlet valve - The valve controls water entering the washer. If it's malfunctioning, it might not open properly.
• Water pressure problems - If your home's water pressure is too low, it could prevent the washer from filling adequately.

An LE error code on a Kenmore washer signifies a lock error. This indicates the washer's control board has detected an issue preventing the tub from spinning properly. There are several reasons why this might happen

• Overloaded washer - If you've crammed too many clothes into the washer, the motor might struggle to spin the tub. Try removing some items and restarting the cycle.
• Excessive detergent - Using too much detergent can create excessive suds, which can interfere with the spinning process. If you see a lot of suds, let the washer sit for 30 minutes to allow the foam to subside. Then, run a drain and spin cycle to get rid of the sudsy water.
• Obstruction in the washer - An object stuck between the inner and outer tub can prevent the tub from spinning. Check the drain filter for any foreign objects that might be causing the blockage.
• Drive system issues - Loose wiring connections or a malfunctioning drive motor or tachometer (a sensor that monitors motor speed) could also be causing the LE error.

On Kenmore washers, FL typically indicates a Flood Error. This means the washer has detected an issue where it’s taking in more water than it can handle.

The "nF" error code on your Kenmore washer indicates an issue with the washer not filling with water properly during the wash cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of "nF" aligns with how it functions in Whirlpool washers. Here's a breakdown of the "nF" error:

• No Fill (nF) - The "nF" error suggests the washer isn't receiving enough water to start the wash cycle. This could be due to several reasons -
  • Closed Water Supply Valves - The hot and cold water supply valves behind the washer might be closed, preventing water from entering the machine.
  • Clogged Water Inlet Hoses - Blockage by debris like sediment or mineral buildup in the water inlet hoses can restrict water flow.
  • Faulty Water Inlet Valves - The valves that control the water flow into the washer might be malfunctioning and not opening properly.
  • Low Water Pressure - In some cases, insufficient water pressure coming into your house could be the culprit.

Symptoms That Might Accompany "nF" Error

In addition to the "nF" error code on the display, you might notice some of these symptoms:

• Wash Cycle Not Starting - The washer might not be able to begin the wash cycle due to the lack of water.
• Wash Cycle Stops Mid-Cycle - If the washer starts the cycle but doesn't receive enough water during the wash, it might stop mid-cycle.
• Insufficient Water in the Washer Tub - You might visually notice that there's not enough water in the washer tub during the wash cycle.

The "LO" error code on your Kenmore washer indicates a door lock issue. This means the washer is unable to detect that the door is properly locked during the wash cycle. Here's a breakdown of the "LO" error:

• Door Lock Malfunction (LO) - The "LO" error suggests a problem with the door lock mechanism on your Kenmore washer. There are a couple of reasons why this might happen:
  • Faulty Door Lock - The door lock itself might be malfunctioning and not engaging properly.
  • Door Strike Misalignment - The door strike (the part on the washer frame that the lock engages with) might be misaligned, preventing the door from locking securely.
  • Debris Obstruction - In rare cases, debris around the door lock or strike might be preventing a proper connection.

Symptoms That Might Accompany "LO" Error

In addition to the "LO" error code on the display, you might notice some of these symptoms

• Wash Cycle Not Starting - The washer might not start the wash cycle because it doesn't detect a secure door lock.
• Door Easily Opens Mid-Cycle - If the door lock malfunctions during the wash cycle, the door might open unexpectedly.

The "nd" error code on your Kenmore washer indicates a drainage issue. It signifies that the washer is unable to drain the water properly during the wash cycle. Here's a breakdown of the "nd" error

• Drain System Malfunction (nd) - This error suggests a problem with the washer's ability to remove water from the tub. There are several potential causes
  • Clogged Drain Hose or Filter - Blockage by debris like lint, coins, or buttons in the drain hose or filter can prevent proper water drainage.
  • Faulty Drain Pump - A malfunctioning drain pump might not be able to pump out the water efficiently.
  • Blockage in Drain Pipes (Less Likely) - In rare cases, there might be a clog in the house drain pipes beyond the washer itself.

Symptoms That Might Accompany "nd" Error

In addition to the "nd" error code on the display, you might notice some of these symptoms -

• Incomplete Drain Cycle - The wash cycle might stop prematurely due to the inability to drain the water properly.
• Overflowing Water - In severe cases, the washer tub might overflow with water if the drainage issue persists.
• Unusual Noises During Draining - The washer might make unusual noises during the draining process due to a clogged pump or restricted hose.

The EF2 error code on your Kenmore washer indicates an issue with excessive suds during the wash cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of EF2 aligns with Whirlpool washers. Here's a breakdown of the EF2 error

Excessive Sudsing (EF2) - The EF2 error suggests that the washer is detecting too much foam or suds in the wash tub. This can happen due to a few reasons

• Improper Detergent Use - Using too much laundry detergent, especially high-efficiency (HE) detergent in a non-HE washer, can lead to excessive sudsing.
• Wrong Detergent Type - Using a regular detergent in a high-efficiency (HE) washer can also cause excessive sudsing, as HE detergents are formulated to create less lather.
• Clogged Drain Hose (Less Likely) - In rare cases, a clogged drain hose could prevent the washer from properly draining the sudsy water, leading to an EF2 error.

Symptoms That Might Accompany EF2 Error

In addition to the EF2 error code on the display, you might notice some of these symptoms

• Excessive Foam Visible Through Washer Lid - You might see a significant amount of suds overflowing from the washer during the wash cycle.
• Wash Cycle Stalled - The washer might stop the wash cycle prematurely due to the excessive sudsing.
• Unusual Noises During Washing - The washer might make unusual noises due to the excessive suds interfering with the agitation process.

The EF1 error code on your Kenmore washer indicates a problem with the drain system, most likely related to the drain pump. While Kenmore washers are manufactured by Whirlpool, the meaning of EF1 aligns with Whirlpool washers. Here's a breakdown of the EF1 error

Drain Pump Malfunction (EF1) - The EF1 error suggests the washer is unable to drain the water properly during the wash cycle due to an issue with the drain pump. There are a couple of reasons why this might happen

• Clogged Drain Pump - Debris like lint, coins, or buttons can accumulate in the drain pump, preventing it from functioning efficiently.
• Faulty Drain Pump - In some cases, the drain pump itself might be malfunctioning and unable to pump out the water.

Symptoms That Might Accompany EF1 Error

In addition to the EF1 error code on the display, you might notice some of these symptoms -

• Incomplete Drain Cycle - The washer might stop the wash cycle prematurely due to the inability to drain the water properly.
• Overflowing Water - In severe cases, the washer tub might overflow with water if the drainage issue persists.
• Unusual Noises During Draining - The washer might make unusual noises during the draining process due to a clogged pump.