Your Error Fix Hub

The E35 error code on your Kenmore washer indicates an issue with overflowing during the wash cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E35 code aligns with Whirlpool's system. Here's what the E35 error signifies

• Overfilling Detected (E35) - The E35 code suggests the washer has detected water overflowing beyond a safe level. This could be due to several reasons
  • Faulty Water Level Sensor - A malfunctioning water level sensor might be sending incorrect signals to the control board, causing the washer to overfill.
  • Clogged Drain System - A blockage in the drain hose, pump filter, or elsewhere in the drainage system could prevent water from properly draining out during the wash cycle, leading to overflow.
  • Faulty Inlet Valve - A faulty inlet valve might not be shutting off properly, allowing more water to enter the washer than necessary.
  • Other Issues - Less likely, there could be problems with hoses, air pressure sensors (if your model has them), or the control board itself.

The E24 error code on your Kenmore washer typically indicates a drainage issue. Here's a breakdown of what the E24 error signifies

Drainage Problem (E24)

The E24 code suggests the washer is unable to drain the water properly during the wash cycle. This could be due to several reasons, similar to the E21 error code on Kenmore washers

• Blockage - A blockage in the drain hose, pump filter, or somewhere else in the drainage system might prevent water from flowing out. This blockage could be caused by debris like lint, coins, or buttons.
• Faulty Drain Pump - A malfunctioning drain pump might not be able to pump the water out effectively.

The E21 error code on your Kenmore washer typically indicates a drainage issue. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E21 code aligns with Whirlpool's system. Here's a breakdown of what the E21 error signifies

• Drainage Problem (E21) - The E21 code suggests the washer is unable to drain the water properly during the wash cycle. This could be due to several reasons
  • Blockage - A blockage in the drain hose, pump filter, or somewhere else in the drainage system might prevent water from flowing out. This blockage could be caused by debris like lint, coins, or buttons.
  • Faulty Drain Pump - A malfunctioning drain pump might not be able to pump the water out effectively.
  • Other Issues - Less likely, there could be problems with sensors or electrical connections related to the drainage system.

The E13 error code on your Kenmore washer indicates a potential leak within the washer. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E13 code aligns with Whirlpool's system. Here's a breakdown of what the E13 error signifies -

Possible Leaks Detected (E13)

The E13 code suggests the washer has detected a leak somewhere in the system. There are two main possibilities for the leak -

1. Water Leak - There might be an actual leak of water from a hose, tub, or another component within the washer.
2. Air Leak - The E13 code can also be triggered by an air leak within the washer's air pressure system, which is used for water level control. This air leak could be in the air bell (a component connected to the washer tub) or the hoses connected to it.

The E11 error code on your Kenmore washer indicates an issue with the water filling process. Since Kenmore washers are manufactured by Whirlpool, the meaning of the E11 code aligns with Whirlpool's system. Here's what the E11 error signifies

Water Filling Problem (E11)

The E11 code suggests the washer isn't filling with water properly at the beginning of the wash cycle. This could be due to several reasons

• Water Supply Issues
  • Closed Shutoff Valves - The hot and cold water shutoff valves behind the washer might be accidentally closed, preventing water flow.
  • Low Water Pressure - If the water pressure coming into your home is lower than the minimum required by the washer, it might trigger the E11 error.
• Problems with the Washer
  • Clogged Inlet Hoses - Screens or filters in the water inlet hoses might be clogged with debris, restricting water flow.
  • Faulty Water Inlet Valve - A malfunctioning water inlet valve might not be opening properly to allow water into the washer.
  • Defective Water Level Sensor - A faulty sensor might not be sending the correct signal to the control board regarding the water level, leading to the E11 error.

The Sd error code on your Kenmore washer indicates an issue with excessive suds during the wash cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of the Sd code aligns with Whirlpool's system. Here's a breakdown of what the Sd error signifies

• Excessive Suds Detected - The Sd error code means the washer has detected more suds than it can handle during the wash cycle. This can prevent the washer from rinsing clothes properly and could lead to issues like -
  • Residue left on clothes
  • Reduced cleaning performance
  • Overflow due to excessive foam

Causes of Excessive Suds (Sd Error)

• Too Much Detergent - Using more detergent than recommended for your load size and water hardness can lead to excessive suds.
• Improper Detergent - Using a detergent not formulated for high-efficiency (HE) washers can cause excessive suds in HE washers. Kenmore washers often use HE technology.
• Incorrect Cycle Selection - Choosing a delicate cycle with too much suds production for heavily soiled clothes might contribute to the Sd error.

The rL error code on a Kenmore washer typically indicates that the washer detected a load in the drum during the Clean Washer cycle. Since Kenmore washers are manufactured by Whirlpool, the meaning of the rL code aligns with Whirlpool's system. 

The F99 error code on a Kenmore washer typically indicates a communication error within the appliance. Since Kenmore washers are manufactured by Whirlpool, the meaning of the F99 code aligns with Whirlpool's system. Here's a breakdown of what the F99 error signifies for your Kenmore washer

Communication Disruption

The F99 error code points to a problem with communication between various components within your washer. This could be due to several reasons -

• Electrical Issues - Loose or disconnected wires, faulty electrical connections, or power surges might disrupt communication between the control board and other components.
• Control Board Malfunction - In some cases, a malfunctioning control board itself might be causing communication errors.
• Component Failure - Less likely, the issue could be due to a malfunctioning component that isn't communicating properly with the control board.

The meaning of F84 on a Kenmore washer likely indicates a communication error between the control board and the display board. This is because Kenmore washers are manufactured by Whirlpool, and F84 often signifies this issue in Whirlpool washers.

Here's a breakdown of what the F84 error code signifies for your Kenmore washer

• Communication Disruption - The F84 error code typically points to a problem with communication between the control board (the brain of the washer) and the display board (the panel with buttons and lights you interact with). This disrupted communication can prevent the washer from functioning correctly or displaying the proper information.

Here are some possible reasons for the F84 error on your Kenmore washer

• Temporary Glitch - A temporary glitch or power surge might disrupt communication between the control board and display board.
• Loose Wire Connections - Over time, the wires connecting the control board and display board might become loose or disconnected, causing communication problems.
• Faulty Control Board or Display Board - In some cases, a malfunctioning control board or display board component could be responsible for the F84 error.

The F82 error code on a Kenmore washer likely indicates an issue with the lid lock or lid lock mechanism. Since Kenmore washers are manufactured by Whirlpool, the meaning of the F82 code aligns with Whirlpool's system. Here's what the F82 error signifies for your Kenmore washer

Meaning of F81 Error Code

• Lid Lock Malfunction - The F82 error code typically points to a problem with the lid lock mechanism that prevents the washer from starting or continuing a wash cycle. This could be due to several reasons -
  • Faulty Lid Switch - The lid switch is a safety mechanism that ensures the washer door is properly closed and locked before the wash cycle begins. A malfunctioning switch might not register a closed lid, triggering the F82 error.
  • Misaligned Lid Strike - The lid strike is the part on the washer frame that the lid latch connects with. If the strike is misaligned or damaged, the lid might not latch securely, causing the F82 error.
  • Defective Lid Lock - In some cases, the lid lock itself might be malfunctioning and not locking the lid properly.